CURRENT PAGE: Home >> News

Attentions for Wood Briquette Machine

Addtime:2014-1-3 15:33:53   Author:Hongyun Machinery   visited:2076


1.Check and confirm there is no impurity blocked in the machine before starting it.

2.Don’t start sawdust wood briquette machine until the heating temperature reaches up to the requested temperature(the     heating temperature is 20-30℃ higher than the one in the normal production)

3.Strictly prohibit feeding too much raw material to avoid the overloaded running of machine.

4.Strictly prohibit feeding the unsuitable or other hard raw material into the machine to avoid unnecessary loss.

5.Stop biomass briquette machine at once when the screw propeller stop rotating during the operation ,run the machine reversely to clean up raw material inside the screw propeller, then start the machine again according to the above instructions.

6.The outlet should direct to the wall, and strictly forbid any people to stand in the front of briquette outlet to avoid personal injury.

7.Cut off the power supply after stopping the wood briquette machine to avoid any accidents.


Material for biomass briquetting

The best materials for briquetting are sawdust and other woody residues, because these contain a high proportion of lignin. However, most dry agricultural residues can be used if they are ground into a coarse powder. Grain straw and dried grasses do not make good briquettes on their own, but work well when mixed with woody materials to provide the lignin. Bagasse, shells (such as from peanuts) husks (such as rice husks and corn cobs) and pine needles make reasonable briquettes. However rice husks are abrasive due to their silica content, and can reduce the life of machine components.

Our Product Class
What We Do
News
Contact Us

Attn: Cynthia
Tel: (86)15736766202
Skype:biomassmachines
ADD:Gaocun Economic Development Zone,Xingyang City, Henan Province, China
E-mail: biomassmachines@gmail.com